Starke Yacht Care Crystal Clear Glass Polish is a water based, biodegradable solution for polishing marine glass to perfection. Our chemists have worked diligently on finding only the best scratch free, synthetic abrasives combined with the highest grade Aluminum Oxide. Our Aluminum Oxide is a hybrid 100% scratch free formula blended with a proprietary leveling compound to deliver outstanding clarity & light refraction as well as nano-sized adhesion agents allowing for maximum durability & performance of any of our ceramic or polymer based sealing products.
We recommend using Starke Venom Water Spot remover, especially on glass panels with a high concentration of water spots and salt etchings, prior to using Crystal Clear Glass Polish and Starke sealant of choice.
Use CCGP with our felt glass polishing pad on either a rotary, dual action, or by hand but always be conscious of swirl marks if a rotary is used and be prepared to possibly have to use a DA as a final step to ensure a swirl free finish.
100% PRICE MATCH GUARANTEE
Free shipping on all orders over $150 in domestic United States. Orders under $150 are charged $5 flat rate shipping.
Same day shipping before 2pm eastern time
All orders ship through UPS ground and USPS Priority Mail for 1 to 3 day ship times
Discounted overnight rates through UPS
Email Noah@MarineDetailSupply.com
How to Use Starke Yacht Care Crystal Clear Glass Polish
Restore your marine glass to pristine condition with Starke Yacht Care Crystal Clear Glass Polish, a biodegradable, water-based formula designed for superior clarity and protection. Follow these steps for best results:
Step 1: Prepare the Glass Surface
Pre-Clean the Glass:
If water spots or salt etchings are present, use Starke Venom Water Spot Remover to eliminate these contaminants.
Rinse thoroughly with clean water and dry the surface with a microfiber towel.
Step 2: Choose the Right Polishing Tool
Select the appropriate method for your application:
Rotary Polisher with a felt glass polishing pad (ideal for heavy-duty polishing).
Dual Action (DA) Polisher with a felt pad (for a swirl-free finish).
Hand Application with a felt applicator (for smaller areas or touch-ups).
Step 3: Apply the Polish
Dispense a small amount of Crystal Clear Glass Polish onto your felt pad or applicator.
Spread the polish evenly over the surface, ensuring consistent coverage.
Step 4: Polish the Glass
Polishing Techniques:
Rotary Polisher:
Operate at low to medium speed with light pressure.
Be cautious to avoid creating swirl marks.
DA Polisher:
Use medium speed for a smooth, swirl-free finish.
By Hand:
Apply using a circular motion with steady, even pressure.
Inspect the Surface:
After polishing, wipe off any remaining residue with a clean microfiber towel.
Check for clarity and a uniform finish.
Step 5: Address Swirl Marks (if needed)
If using a rotary polisher results in swirl marks, follow up with a DA polisher for a final pass to achieve a flawless, swirl-free finish.
Step 6: Protect the Glass
Apply a Starke ceramic or polymer sealant to enhance durability and maintain the polished surface. Follow the sealant's specific application instructions.
Pro Tips
Work in small, manageable sections for better control and precision.
Avoid polishing in direct sunlight or on hot glass to ensure even results.
Always test the product on a small, inconspicuous area before full application.
Bring back the brilliance of your marine glass with Starke Yacht Care Crystal Clear Glass Polish!
