Starke Liquid THOR Nano Ceramic Marine Coating

$215.00
By Starke Yacht Care
Minus Plus

Liquid Thor is an advanced marine grade nano ceramic coating made with the installer in mind. The sophisticated carrier agent is a low VOC solvent that has amazing work time and is able to suspend and efficiently transfer high levels of Si02/Ti02 nano particles and UV inhibitors to the gel coat, marine paint, glass, metal, vinyl, plastic and isinglass.

 

How to Use Liquid Thor

  1. Prepare the Surface:

    • Wash the boat thoroughly with a high-quality boat soap to remove all dirt and grime.
    • Decontaminate the surface with a clay bar to remove embedded particles.
    • Polish the surface to eliminate oxidation, scratches, or imperfections for the best adhesion and gloss.
    • Perform a final wipe-down with isopropyl alcohol (IPA) to ensure the surface is completely clean and residue-free.

  2. Application Conditions:

    • Work in a shaded, cool, and well-ventilated area.
    • Ensure the surface is completely dry before application.

  3. Apply Liquid Thor:

    • Shake the bottle well before use.
    • Use a soft foam applicator or microfiber applicator pad to apply a small amount of Liquid Thor.
    • Spread the product evenly in a crisscross pattern (horizontal and vertical strokes) over a small section (2' x 2') of the surface.

  4. Wait for Flash Time:

    • Observe the coating as it begins to flash. This may take 1-3 minutes, depending on temperature and humidity.
    • Do not let the coating fully dry on the surface.

  5. Buff Off Residue:

    • Using a clean, high-quality microfiber towel, gently buff the area to remove excess product.
    • Switch to a fresh microfiber towel for a final pass to ensure a smooth, streak-free finish.

  6. Cure Time:

    • Allow the coating to cure for 12-24 hours in dry conditions before exposing the boat to water or moisture.
    • Avoid washing the boat during this time for optimal bonding.

  7. Maintenance:

    • Clean regularly with a pH-balanced soap; avoid abrasive cleaners that may degrade the coating.
    • Use a compatible ceramic maintenance spray to boost gloss and hydrophobic properties between applications.

  8. Reapplication:

    • Depending on environmental conditions and usage, reapply Liquid Thor as needed, typically every 12-24 months.

Tips:

  • Test on a small, inconspicuous area before applying to the entire surface.
  • Apply in sections to maintain control and ensure an even finish.
  • Store the product in a cool, dry place with the cap tightly sealed to preserve its effectiveness.

Liquid Thor creates a durable, glossy shield on gel coat, marine paint, glass, metal, vinyl, plastic, and isinglass—delivering long-lasting protection and brilliance. 🌊✨

100% PRICE MATCH GUARANTEE

  • Free shipping on all orders over $150 in domestic United States. Orders under $150 are charged $5 flat rate shipping. 
  • Same day shipping before 2pm eastern time
  • All orders ship through UPS ground and USPS Priority Mail for 1 to 3 day ship times
  • Discounted overnight rates through UPS
  • Email Noah@MarineDetailSupply.com
      More Details Right